Genie Lamp Accessory parts kit

Print pagePDF pageEmail page

Genie Lamp Accessory parts kit

After considerable thought on this subject, we’ve decided to assemble and offer, a kit of parts for the Three Light Genie Lamp. It will contain the following:

Click on image to enlarge
Genie Lamp Accessory kit

A three lamp “pod,” which has one each red, green, and amber LED installed and wired into an ABS utility project box. The box is 3 inches wide, 2 inches high, and 1 inch thick (front to back). The pod will be pre-attached to a thirty foot length of 4 conductor 18 gauge wire, and the wires will be connected to the three lamps within the box.

  • Five each push-in type connectors to facilitate tapping into the existing wiring on the motorhome.
  • An assortment of wire ties to facilitate the routing and securing of the wire.
  • A length of wire loom to be used as necessary for protection of the wire where it passes through or over potentially sharp edges.
  • A set of detailed installation instructions.

We are hoping that the availability of this kit will serve to promote the installation of a Genie Lamp on every coach that is equipped with the J71 AutoPark system. One of these Genie Lamp systems will enable the driver to carefully monitor the performance of the AutoPark while the coach is moving or stopped – – a feature seriously lacking on most motorhomes with AutoPark parking brake systems.

We are asking 89 dollars for the kit including postage to anywhere in the lower 48 states. If this is more than you can afford, let us know and we’ll try to find alternatives for you. Genie Lamp accessory with installation instructions can be requested and shipped directly to you, contact oldusedbear with your request.